PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
+8613315245055
Mobile
javin@baofasteel.com
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
The alloy also has good mechanical properties and anode reaction.
Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
6061 is a common duralumin with good machinability and moderate strength.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
6061 is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.
It can still maintain good operation after annealing.
If there is a certain amount of manganese and chromium, the bad effect of iron can be neutralized.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
2024-T3aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
Main applications: aircraft structure, rivets, truck wheels, propeller components and other structural parts.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
ENQUIRE NOW
If you are interested in our products and services, please contact us or leave us a message, we will serve you wholeheartedly
CONTACT US
Add : Building 8, Shangang New World, Jinan City, Shandong Province
Copyright 2025 : Baofa (Xiong'an) Metal Materials Sales Co., Ltd. Powered by：CEglobal SEO BUSINESS LICENSE
